Manualshelf

User Manual

ManualsBrandsAutel ManualsAutomotiveMaxiSys MS919 Automotive Diagnostic Tool, Advanced Intelligent Diagnostics for Diagnostic Technician, 5-in-1 VCMI, TSB, Repair Assist/Tips, Module Topology, Bi-Directional Control(US IP ONLY)
201202203204205206207208209210
195
Multimeter Test Lead
Used to connect the waveform generator and the probe.
7.3.3 Getting Started
Before opening the waveform generator application, the VCMI device must be
connected to the Tablet via the provided USB cable or Wi-Fi network. For more
information, see
Establish Vehicle Communication on page 19.
Figure 7-1 Sample Connection Diagram
To open the waveform generator application
1. Insert the multimeter test lead ends into the multimeter jacks on the top of the
VCMI device to compete the connection.
2. Tap the Measurement icon on the Home screen of the MaxiSys MS919 Tablet.
The Measurement screen displays.
3. Tap the Waveform generator icon to open the waveform generator Menu.
4. Select a test to continue.
NOTE
Please check the waveform generator LED status indicator on the front panel of
VCMI device. The waveform generator LED lights green when operating in the
waveform generator mode.