User Manual

215
Figure 7-24 Sample Duty Cycle Setting Screen 2
Value
Description
+1.0%
Raises the duty cycle ratio by 1.0%
-1.0%
Lowers the duty cycle ratio by 1.0%
+10.0%
Raises the duty cycle ratio by 10%
-10.0%
Lowers the duty cycle ratio by 10%
Method 3: Input the duty cycle ratio using the virtual keyboard. Tap the duty cycle
field to clear the current value and input the new value. Tap OK to confirm or Cancel
to exit without saving.
Figure 7-25 Sample Duty Cycle Setting Screen 3
7.3.6 Troubleshooting
If the waveform generator cannot communicate with the MaxiSys Tablet:
 Check if the VCMI device is properly connected to the MaxiSys Tablet through the
supplied USB cable.
 If the communication between the VCMI device and the MaxiSys Tablet still fails,
restart the MaxiSys Tablet and reconnect the VCMI device.