User Manual

238
The time base controls the time interval across the device display. Tap the Time Base
button at the bottom to open the setting dialog box.
Figure 7-26 Sample Time Base Screen 1
Figure 7-27 Sample Time Base Screen 2
Continuous Mode: if the time base is set to more than or equal to 200ms/div, the
device switches to the continuous mode. In this mode, the device updates the trace
continuously as each capture progresses, rather than waiting for a complete capture
before updating the trace.
Indicator Button
In the lower corner of the screen, you can enter the Indicator Mode by tapping the
Indicator button.