User Manual

271
17. MaxiVideo
The MaxiVideo application configures the MaxiSys Diagnostic Device to operate as a
digital video scope by simply connecting the tablet to a MaxiVideo Camera. This function
allows you to examine difficult-to-reach areas normally hidden from sight, with the ability
to record digital still images and videos, which offers you an economical solution to
inspect machinery, facilities, and infrastructure in a safe and quick way.
WARNINGS & IMPORTANTS:
Follow these instructions to reduce the risk of injury from electric shock, entanglement
and other causes and prevent tool damage.
 Do not place the imager head and cable into anything or anywhere that may contain
a live electric charge or moving parts, which increases the risk of electric shock or
entanglement injuries.
 Do not use the imager head cable to modify surroundings, clear pathways or clogged
areas.
 When inspection is completed, carefully withdraw the imager head cable from the
inspection area.
 The imager head cable are waterproof to a depth of 3m (10'), greater depths may
cause leakage into the imager head cable and cause electric shock or tool damage.
 The working temperature of the imager head is between 32° F (0°C) and 113° F
(45°C).
Check-Ups:
 FOR AUTOMOBILES: Ensure the automobile is not running during inspection. Metal
and liquid under the hood may be hot. Don't get oil or gas on the imager head.
 FOR PIPES: If you suspect a metal pipe could contain an electric charge, have a
qualified electrician to check the pipe before using.
 FOR WALLS: For inspecting the inside walls, be sure to shut off the circuit breaker
to the whole house before using the tool.
 WORK AREA: Ensure the work area has sufficient light.
17.1 Accessories
The MaxiVideo Camera and its fittings are the additional accessories. Both sizes (7.5
mm and 5.5 mm) of the imager head are optional and available for purchase along with
the standard MaxiSys tool kit.