User Manual

34
Figure 4-12 Sample Topology Tab Page
B. List Tab Page
Column 1 – displays the system numbers.
Column 2 – displays the scanned systems.
Column 3 – displays the scan results.
 -!-: Indicates that the scanned system may not support the code reading
function, or there is a communication error between the tester and the control
system.
 -?-: Indicates that the vehicle control system has been detected, but the tester
cannot access it.
 Fault | #: Indicates there is/are detected fault code(s) present; “#” indicates the
quantity of detected faults.
 Pass | No Fault: Indicates the system was scanned and no faults were detected.
 Not Scanned: Indicates the system has not been scanned.
 No Response: Indicates the system has not received a response.