User Manual

37
as Control Unit Adaptations, Variant Coding, Configuration or something similar.
4.4.1 Screen Messages
Messages display when additional input is needed before proceeding. There are three
main types of on-screen messages: Confirmation, Warning, and Error.
 Confirmation Messages
This type of messages usually display as an “Information” screen, when you are about
to perform an action that cannot be reversed or when an action has been initiated and
your confirmation is needed to continue.
When a user-response is not required, the message displays briefly.
 Warning Messages
This type of messages displays when completing the selected action may result in an
irreversible change or loss of data. An example of this message is the “Erase Codes”
message.
 Error Messages
Error messages display when a systemic or procedural error has occurred. Possible
errors include cable disconnection and communication interruption.
4.4.2 Making Selections
The Diagnostics application is a menu-driven program that presents a series of options
one at a time. As you select from a menu, the next menu in the series displays. Each
selection narrows the focus and leads to the desired test. Use your fingertip or the stylus
pen to make menu selections.
4.5 ECU Information
This function retrieves and displays the specific information for the tested control unit,
including unit type and version numbers.