User Manual

44
and a Maximum value. When exceeding this range, the trigger function will be executed
and the device will automatically record and save the generated data. You can check the
saved live data by tapping the "Review" button at the bottom of the screen.
Tap the drop-down button on the right side of the parameter name to open a submenu.
The Trigger button is the last one in the submenu. Tap to display the trigger setting
window.
Figure 4-22 Sample Trigger Setting Screen
Two buttons and two input boxes are available in the Trigger Setting window.
a) Trigger On – switches the trigger on and off. The trigger is ON by default.
b) Buzzer Alarm – switches the alarm on and off. The alarm function makes a beep
sound as an alert when the data reading reaches the preset minimum or
maximum point. The buzzer alarm will only sound at the first trigger.
c) MIN – tap this input box to display a virtual keyboard to enter the required lower
limit value.
d) MAX – tap this input box to display a virtual keyboard to enter the required upper
limit value.
 To set a trigger
1. Tap the drop-down button on the right side of the parameter name to open a
submenu.
2. Tap the Trigger button on the right side of the submenu to open the trigger
settings window.
3. Tap the MIN button on the right side, and enter the required minimum value.
4. Tap the MAX button on the right side, and enter the required maximum value.