Trademarks Autel®, MaxiSys®, MaxiDAS®, MaxiScan®, MaxiTPMS®, MaxiRecorder®, and MaxiCheck® are trademarks of Autel Intelligent Technology Corp., Ltd., registered in China, the United States and other countries. All other marks are trademarks or registered trademarks of their respective holders.
Safety Information For your own safety and the safety of others, and to prevent damage to the device and vehicles upon which it is used, it is important that the safety instructions presented throughout this manual be read and understood by all persons operating or coming into contact with the device. There are various procedures, techniques, tools, and parts for servicing vehicles, as well as in the skill of the person doing the work.
Safety Instructions The safety messages herein cover situations Autel is aware of. Autel cannot know, evaluate or advise you as to all of the possible hazards. You must be certain that any condition or service procedure encountered does not jeopardize your personal safety. DANGER When an engine is operating, keep the service area WELL VENTILATED or attach a building exhaust removal system to the engine exhaust system.
Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and precautions. Failure to do so may result in personal injury or damage to the test equipment. To avoid damaging the test equipment or generating false data, make sure the vehicle battery is fully charged and the connection to the vehicle DLC is clean and secure. Do not place the test equipment on the distributor of the vehicle. Strong electro-magnetic interference can damage the equipment.
CONTENTS SAFETY INFORMATION................................................................................................II SAFETY MESSAGES....................................................................................................II SAFETY INSTRUCTIONS............................................................................................. III 1 USING THIS MANUAL........................................................................................... 6 CONVENTIONS..........................
1 Using This Manual This manual contains device usage instructions. Some illustrations shown in this manual may contain modules and optional equipment that are not included in your system. Contact your sales representative for availability of other modules and optional tools or accessories. Conventions The following conventions are used. Bold Text Bold text is used to highlight selectable items such as buttons and menu options. Tap OK.
IMPORTANT Keep the cable away from heat, oil, sharp edges and moving parts. Replace damaged cables immediately. Hyperlink Hyperlinks or links that take you to other related articles, procedures, and illustrations are active in electronic documents. Blue italic text indicates a selectable hyperlink and blue underlined text indicates a website link or an email address link. Illustrations Illustrations used in this manual are samples, the actual testing screen may vary for each vehicle being tested.
2 General Introduction The MaxiTPMS TBE200 is Autel's first generation of laser-enabled tire & brake disc wear examiner. TBE200 provides users with quick and accurate wear measurements along with measuring brake disc wear without having to remove tires. The tool's dual cameras enable users to document tire wear and damage and scan Tire Identification Number (TIN). Use tool separately or with compatible Autel diagnostics tablet app to view and print detailed TPMS reports.
Figure 2-2 Display Examiner Front View 3. Lock/Measuring Button –long press the button for 3 seconds to turn on and off the examiner, or tap measuring button to initiate measurements. 4. 1.65-inch AMOLED Screen Figure 2- 3 Display Tablet Side View 5.
Figure 2- 4 Display Tablet Back View 6. Camera Flash 7. 8 Megapixel Camera 8. Laser Diode 9. 1 Megapixel Camera Power Sources The tablet can receive power from any of the following sources: Internal Battery Pack AC/DC Power Supply Internal Battery Pack The examiner can be powered with the internal rechargeable battery, which if fully charged can provide sufficient power for about 8 hours of continuous operation.
Technical Specifications Table 2- 1 Specifications Item Description Product Name Tire & Brake Disc Examiner Laser Classification Class 3R laser product Optical Power 2.
Item Description Processor 4x ARM Cortex-A35 (1.5 GHz) Memory 1GB RAM LPDDR3 & 4GB ROM Display 1.65-inch AMOLED capacitive touchscreen with 348x442 resolution Connectivity Wi-Fi USB 2.0, Type C Micro-camera s CMOS WXGA, 1 megapixel & 8 megapixel, 30fps Audio Output Output: Beep Power &Battery 3.7 V/3000 mAh 18650 lithium ion battery Charges via 5 V AC/DC power supply Tested Battery Life Around 8 hours of continuous use Battery Charging Input 5 V/1.
Item Description CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6 Other Accessories Table 2- 2 Accessories Power Adapter Used with USB cable to charge TBE200 via DC electrical outlet. Type C USB Cable Connect to power adapter and to TBE200. Use to charge the unit.
3 Getting Started Ensure the TBE200 is connected to the Internet, sufficiently charged or connected to a power outlet. Software Upgrade The Internet connection page automatically displays when the tool is first used. Select a network and enter the password. After the tool is connected to the Internet, the register page displays. Create an Autel ID or log in with your registered email address and password. A green check mark displays on the screen once the tool is registered successfully.
Connect the TBE200 to Wi-Fi. When a software update is available, a red dot will display atop the Settings icon in the upper right corner of the Main Job screen. Tap Update to install the software. Getting Started 1. Long press the power button to turn on the tool. 2. Tire Tread Check: On the Main Job screen, tap the Tread Check icon, and place the tool on the tire surface. Short press the power button, ensure the laser line is perpendicular to the channels of the tire.
3. Brake Disc Check: On the Main Job screen, tap the Brake Disc icon, and place the tool on the disc surface. Short press the power button, ensure the laser extension line passes through the rim center. After about 2s, the screen displays real-time measurement data, left slide to view details. Different icon represents different wear status. Grey, untested; green, in good condition; yellow, replacement recommended; red, replace immediately. 4.
Calibration Frequency: Calibration is recommended every two months. Calibrate immediately when there are deviations in measurements, which may be caused by dropping or collisions.
3 Service Procedures This section introduces information for technical support, repair service, and application for replacement or optional parts. Technical Support If you have any question or problem on product operations, please contact us. AUTEL NORTH AMERICA Phone:1-855-AUTEL-US (855-288-3587) Monday-Friday 9am-6pm EST Website: www.autel.com Email: sales@autel.com; ussupport@autel.
Address: Avenida Americas 1905, 6B, Colonia Aldrete, Guadalajara, Jalisco, Mexico AUTEL APAC Phone: +045 5948465 Email: sales.jp@autel.com; support.jp@autel.com Address: 719, Nissou Building, 3-7-18, Shinyokohama, Kouhoku, Yokohama, Kanagawa, Japan 222-0033 Website: www.autel.com/jp/ AUTEL IMEA DMCC Website: www.autel.com Phone: +971 43682500 Email: sales.imea@autel.com; imea-support@autel.
8th Floor, Building B1, Zhiyuan, Xueyuan Road, Xili, Nanshan, Shenzhen, 518055, China Other Services You can purchase the optional accessories directly from Autel’s authorized tool suppliers, and/or your local distributor or agent.
4 Compliance Information FCC Compliance FCC ID: WQ8TBE200 This device complies with Part 15 of the FCC rules and Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, interference that may cause undesired operation. including Cet appareil est conforme aux CNR exempts de licence d’Industrie Canada.
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CE COMPLIANCE This product is declared to conform to the essential requirements of the following Directives and carries the CE mark accordingly: EMC Directive 2014/30/EU R&TTE Directive 1999/5/EC Low Voltage Directive 2014/35/EU This device was tested for typical Limb Worn and Face Up operations. To comply with RF exposure requirements, a minimum separation distance of 0mm is used between the user’s Limb and the Tire & Brake Disc Examiner, including the antenna.
5 Warranty Limited One Year Warranty Autel Intelligent Technology Corp., Ltd.
IMPORTANT All contents of the product may be deleted during the process of repair. You should create a back-up copy of any contents of your product before delivering the product for warranty service.