Users Manual Part 2

101
Table 8-2 Scope Navigation Toolbar Buttons
Name
Button
Description
Scope
Icon
Indicates the oscilloscope connection status. See
Scope Button on page 115 for more information.
Start/Stop
Start or stop the oscilloscope device. See
Start/Stop Button on page 116 for more
information.
Presets
Access preset guide. Select preset to correctly
configure oscilloscope to capture a waveform of
the specified type See Presets Menu on page 116
for more information.
Settings
Configurations of math channel, mode setting and
signal generator. See Settings Menu on page 119
for more information.
Window
Display
Set the layout and channel position. See Window
Display Menu on page 124 for more information.
File
Print, open, save, and delete the waveform data.
See File Menu on page 128 for more information.
Help
View the user manual, update the APK
(oscilloscope software) and firmware. See Help
Menu on page 130 for more information.
Number of
Samples
Set the maximum number of samples that will be
captured on each channel. See Number of
Samples on page 131 for more information.
Auto
Scale
Set the appropriate time base and amplitude range
to display the signal correctly. See Auto Scale on
page 131 for more information.
Scope Button
This Scope button displays the oscilloscope connection status. A green check
mark means the tablet and oscilloscope are connected successfully; a red X
means the tablet and the scope are not connected.