Users Manual Part 4

207
Table 8-1 Upper Toolbar Buttons
Name
Button
Description
OBD Icon
Displays the device connection status. See OBD
Button on page 223 for more information.
Start/Stop
Start or stop the device. See Start/Stop Button on
page 223 for more information.
Settings
Set the communication protocol manually. See
Settings Menu on page 223 for more information.
File
Print, open and save the waveform data. See File
Menu on page 226 for more information.
Help
View the user manual and update the software.
See Help Menu on page 227 for more information.
OBD Button
This OBD button indicates the OBD device connection status. A green check mark
means the VCMI and the tablet are connected; a red X means no connection has been
established.
Start/Stop Button
You can tap the Start/Stop Button icon to start or stop the device.
Name
Button
Description
Start
Tap to start the device.
Stop
Tap to stop the device.
Settings Menu
Tap the gear-shaped icon in the top navigation bar to enter the Settings Menu.
The pin number for OBDII may be different for different vehicle modes. In Settings
Menu, you can select OBDII connector’s signal pins manually if the test vehicle’s actual
communication signal pins are assigned differently.