Users Manual Part 4

245
 Update (for VCMI software only) – updates VCMI software via Internet through
the MaxiSys tablet networking using USB connection.
 Select a connection mode to manage and set up connection.
2. Settings – this section allows you to manage wireless pairing or set up network
connection.
 Wi-Fi Setting - searches and displays the type and partial serial number for all
devices available for Wi-Fi connection.
 BT Setting – searches and displays the type and partial serial number for all
devices available for pairing. Tap a device to start pairing. The BT status icon
displays the received signal strength for the device.
 Ethernet Setting – allows you to perform network configuration.
12.1 Wi-Fi Connection
Wi-Fi Connection is an advanced function for quick linkage with VCMI. Since Wi-Fi
connection supports 2.5G/5G, the MaxiSys Ultra tablet and VCMI share a faster and
more stable connection when using this communication method. The tablet can be
operated up to 100 meters away from the VCMI device when connected to the vehicle.
The Wi-Fi connection is an ideal communication mode when using the oscilloscope
measurement function, See Chapter 9.1 Oscilloscope Operation.
Figure 12-2 Sample Wi-Fi Connection Screen
 To connect the VCMI device with the tablet via Wi-Fi connection
1. Power on the tablet.