Owner manual

3
Wireless Communication
The Bluetooth Diagnostic Interface supports Bluetooth communication. It can
transmit vehicle data to the MaxiSys Display Tablet without a physical
connection. The working range of the transmitter through Bluetooth
communication is about 755 feet (about 230 m). A signal lost due to moving
out of range automatically restores itself when the display unit is brought
closer to the VCI unit.
For detailed information about VCI connection with the MaxiSys display tablet,
please refer to the MaxiSys User Manual.
USB Connectivity
The VCI device also provides a direct connection to the MaxiSys display tablet
or a PC via a USB 2.0 full-speed connection. All of the electronics are
contained in the device shell, making it a compact and rugged vehicle
communication tool.
Power Source
The Bluetooth Diagnostic Interface operates on 12-volt vehicle power, which it
receives through the vehicle data connection port. The unit powers on
whenever it is connected to an OBD II/EOBD compliant data link connector
(DLC).
It can also be powered through connection with a PC via the USB cable, so
there’s no need to connect the device to the vehicle when performing firmware
update through the PC.