User Guide
10
LED#1 LED#2
ON ON
•
ATKey.card is locked (due to continuous 5 times fingerprint mismatching).
•
Please wait for 1 (1
st
time) or 12 hours (from 2
nd
time) to unlock
ON ON
•
Normally this is BLE issue (BLE connected, fingerprint verified, but still
waiting response from Host)
•
Please re-boot the card (long-press power button to power off, then click
power button to power ON)
-
Slow flashing
•
Battery low, please do battery charge via USB
flashing (waiting
for fingerprint
matching)
ON for 1 sec.
ON for 1 sec.
•
Fingerprint matching failed
•
Fingerprint matched, and NFC is ON (if it’s not in USB or BLE connected)
ON flashing
•
Request to confirm the BLE pairing
•
Touch fingerprint sensor to confirm the pairing
• If this happens on “standalone mode” (click power button 3x times), please
enroll your fingerprint (there is no fingerprint template inside the card)
ON flashing
• If this happens on “standalone mode” (click power button 3x times), please
do fingerprint matching first (fingerprint already enrolled into card), then
you can start to enroll new fingerprint
ON
flashing
OFF
•
Battery charging
•
Battery charge full, stop charging
OFF OFF
•
(power on but no LED ON) very low battery, please do battery charge and
wait till LED is ON
LED#1
LED#2
| LED