User Guide
• Click target ATKey.card, click “Connect” from UI and
touch fingerprint sensor (LED#2 is white flashing) to
confirm the pairing
• Then ATKey is paired with battery indicator (OS 1903
build or later version)
• Or you can skip BLE pairing, just using USB for
fingerprint enrollment
• Go to “Windows Settings (OS build is 1903 or later
version) – Enroll fingerprint” page for the detail
11
• Power on ATKey.Card
• Check Youtube video here for the detail:
https://youtu.be/BdF_1jbowXw
• LED#1 is BLUE ON, quick click power-button
3x times to go into enrollment mode:
• If there is no any fingerprint enrolled, LED#2
turns to WHITE
• If there are any enrolled fingerprints, LED#2 is
GREEN flashing, please verify enrolled
fingerprint to start enrolling new finger
• Put your specific finger on sensor, touch
fingerprint sensor circle and slow (LED is
WHITE flashing, from slow to faster), till LED
shows GREEN, then your fingerprint is
enrolled
• If you want to quit from standalone
enrollment, click power button once, LED will
turn to Blue, back to normal state.
Standalone enrollment
Enroll from Windows Settings
• If your OS is Windows 10 build 1903 or later versions,
you can manage ATKey as security key through
Windows Settings
• (BLE) Pair ATKey with your Windows first
• Through Windows Settings => Device => ADD
Bluetooth or other device
• Add a device - Bluetooth
• Power on ATKey, double-click power button to
BLE secure pairing mode (LED#2 is cyan
flashing), then you will see the ATKey.card
showing (ATKey.card-keycode)
| Step1: Fingerprint Enrollment (up to 8x fingerprints)