OWNER'S MANU AL MANUAL ACD-94 AM/FM/MPX RADIO WITH FOLD-DOWN DETACHABLE FRONT PANEL, COMPACT DISC PLAYER, CD CHANGER CONTROLS, MP3 CD PLAYBACK, WIRELESS REMOTE CONTROL AND QUARTZ CLOCK
INSTRUC T IONS INSTALL ALLA INSTRUCT ALL ATAION T IONS INST ALL T IONINSTRUC INSTALL ALLA INSTRUCT INST INSTALLATION INSTRUCTIONS This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle.
DAY MON. - FRI.
RRAADIO DIO WIRING SPE A K ER WIRING SPEA RADIO WIRING REFER TO PAGE 5 FOR SPEAKER WIRING AUTOMATIC ANTENNA ANTENNA BLUE IMPORTANT THE BLUE WIRE CAN BE USED TO REMOTELY ACTIVATE AN AUTOMATIC ANTENNA OR AN EXTERNAL AMPLIFIER (SEE ANTENNA OR AMPLIFIER MANUAL) EXISTING ANTENNA CABLE FUSEBLOCK “RADIO” FUSE +12V ACCESSORY RED 0.
WARNING! REFER TO PAGE 4 FOR RADIO WIRING ! THE AMPLIFIERS IN THIS RADIO ARE ONLY DESIGNED FOR USE WITH 4 SPEAKERS. ! NEVER COMBINE (BRIDGE) OUTPUTS FOR USE WITH 2 SPEAKERS. ! NEVER GROUND NEGATIVE SPEAKER LEADS TO CHASSIS GROUND. ! FAILURE TO WIRE EXACTLY AS SHOWN BELOW MAY CAUSE ELECTRICAL RCA LINE IN JACKS RCA LINE OUT FOR USE WITH JACKS AUXILIARY INPUT FOR USE WITH DEVICES (CD OPTIONAL PLAYER, ETC.) EXTERNAL AMPLIFIERS NOTE: THIS RADIO WILL CONTROL RAMPAGE CD CHANGER MODEL.
OPER AT ING INSTRUC OPERA INSTRUCTT IONS 32 2 16 33 17 19, 27, 30, 31 (BEHIND PANEL) 8 10 12 9 18 34 13 3, 4, 5, 6, 7 29 28 22 23 38 POWER ON/OFF/ILL BUTTON ( ) Press this button to turn the unit on or off. If the ignition switch is “on”, the unit will also turn on automatically when a compact disc is inserted, or if any other button is pressed.
5 3 2 6 7 FRONT/REAR FADER CONTROL To adjust the front-rear speaker balance, first select the Fader mode by pressing the SEL so the FAD indication appears on button the display panel. Within 5 seconds of choosing the Fader mode, rotate the CCW to adjust AUDIO ADJUST control the front-rear speaker balance to the front speakers or CW to adjust it to the rear speakers. The fader position will be shown on the display panel from FAD 10R (full rear) to FAD 10F (full front).
OPER AT ING INSTRUC OPERA INSTRUCTT IONS During disc play, pressing this button will mute disc audio and disc play will stop. During this time, the indication will remain on the display panel to show that a disc is still loaded in the unit. bl BAND SELECTOR (BAND/LOUD) Each time this button is pressed, the radio band is changed. The indication AM, F1, F2 or F3 will appear on the display panel according to your selection. This button is also used when playing an MP3 disc.
bq bm OPERA INSTRUCTT IONS OPER AT ING INSTRUC bt is most useful when traveling in a new area MODE SELECTOR (MODE) where you are not familiar with the local This button is used to select the radio, CD stations. player, auxiliary (AUX) input or CD changer (if installed) playback mode. Each press of STATION PRE-SET MEMORIES To set any of the 6 pre-set memories in each the button will select a different mode as indicated on the display panel. band, use the following procedure: 1.
OPER AT ING INSTRUC OPERA INSTRUCTT IONS cp be selected as shown on the display panel. REPEAT PLAY SELECTOR (RPT) Similarly, each time the Backward TRACK During disc play, press this button to repeat ) side of the button is pressed, Select ( the play of the selected track (S--RPT will the next lower track number will be selected appear on the display panel). Play of the as shown on the display panel.
bt ct dn OPERA INSTRUCTT IONS OPER AT ING INSTRUC accidentally damaged ( will appear on the circumstances as it will erase the time display panel to indicate that a disc is and pre-set memories: loaded in the player). Play of the disc can 1.Upon initial installation after all wiring is be resumed by using the MODE button completed. to choose the CD player function. 2.
OPER AT ING INSTRUC OR CODES OPERA INSTRUCTT IONS / SET SETTT ING THE CLOCK / ERR ERROR 12 3.When taking the front panel with you, please use the supplied carrying case to protect the panel from dirt and damage. Make sure there is no dust or dirt on the electrical terminals on the back of the panel as this could cause intermittent operation or other malfunctions.
Size: 7" W x 2" H x 6-5/16" D 178 mm x 50 mm x 160 mm Operating Voltage: 12 volts DC, negative ground Fuse Ratings: Constant (Yellow wire): 15 AMP. Switched (Red wire): 0.5 AMP. Output Power: 160 watts maximum (40 watts x 4 channels) Output Wiring: Floating-ground type designed for 4 speaker use. Front and rear channels CANNOT be combined (bridged) for use with 2 speakers. RCA low-level outputs (front and rear channels). Output Impedance: Compatible with 4 – 8 ohm speakers.
CD CH A NGER CONTR OL S CHA CONTROL OLS CD CH A NGER CONTR OL S CHA CONTROL OLS Built into this radio are controls to operate an optional CD changer. Please check with your Rampage/Audiovox car stereo specialist or call 1-800-645-4994 for recommendations of the models that will work with this radio. Adjustment of the audio functions (volume, tone, balance, and fader) for the CD changer operate in the same manner as they do for radio play.
button will also select tracks in the shuffled order instead of the normal progression. The Shuffle Track mode can be canceled by pressing the SHF button or by activating the Scan or Repeat Play functions. When the SHF button is pressed and held, the DSF indication will appear on the display panel and the discs in the magazine will be played in a random, shuffled order, as well as the tracks on each disc.
CD CH A NGER ERR OR CODES / REMO TE CONTR OL OPER AT ION CHA ERROR REMOTE CONTROL OPERA CD CH A NGER ERR OR CODES CHA ERROR If a problem should develop while operating the CD changer, the following error codes may appear on the display panel. ER-1: Indicates that there is no magazine loaded in the CD changer. ER-2: Indicates a problem with the magazine eject function. ER-3: Indicates an error in the disc loading function. ER-4: Indicates an error in the disc un-loading function.
cm ds 7 TIME/FREQUENCY (T/F)/0 - See Main Unit. 8 AUTO SCAN/PRE-SET STORE (AS/PS)/MP3 - See Main Unit bp 9 Main TRACK/DISC REPEAT (RPT) - See Unit cp and du bl DISC UP SELECT (D.UP) - See Main Unit cr bm DISC DOWN SELECT (D.DN) - See Main Unit cr bn BATTERY COMPARTMENT - Holds one 3-Volt Button Cell for remote wire- bq TRACK/DISC PAUSE (PAU) - See Main Unit cn br TRACK/DISC SCAN (SCN) - See Main Unit co and dt bsAM/FM BAND(BAND)/ENTER SELECTOR – See Main Unit bl . . . 1 . 3 2 4 5 6 17 .
MP3 PL AYBACK OPER AT ION PLA OPERA CA RE A CARE 18 14 11 2 9 12 13 3 4 5 6 7 8 1 10 1. AS/PS: The AS/PS button, also labeled MP3, is used to search and/or access the Track Number and Directory/Album title; additional presses will momentarily access thedisc serial number (if applicable), and display the current Directory/Album title. By using this button, you can quickly jump to a Directory/Album and then navigate within that area to locate and play a specific song/track. 2.
NOTE: The D.DN (Preset 5) and D.UP (Preset 6) buttons also enable track selection in 10track steps during normal CD play and when searching for files or directories. LOADING AN MP3 DISC As with a normal music CD, when an MP3 disc is initially loaded, S--CDP appears on the display for 5 seconds. The ( ) indication illuminates and becomes animated, the symbol lights; then MP3 T and the track number momentarily appear, followed by the ID Tag, if supported, and READING on the display.
MP3 PL AYBACK OPER AT ION PLA OPERA 3. Press the ENTER (BAND/LOUD) button to access the directory. NOTE: If the Directory/File is entered incorrectly, or does not exist, NOT FOUND will be displayed momentarily. 4. Then continue the search within the directory for the song title by using the / buttons, but use the button first. 5. When the title is accessed, press the ENTER button again to begin play of the selected song.
Attempting to use non-standard shape discs (e.g.; square, start, heart) may damage the unit. Be sure to use round-shape CDs only in this unit. NOTES ON CD-Rs (Recordable CDs)/CD-RWs (Rewriteable CDs): MP3 PL AYBACK OPER AT ION PLA OPERA 1. Be sure to use discs with the following marks only for play in this unit: 2. The unit cannot play a CD-R or CD-RW that is not finalized. (Please refer to the manual of your CD-R/CD-RW software for more information on the finalization process.) 3.
CA RE A ND MA INTENA NCE CARE AND MAINTENA INTENANCE ! When cleaning the interior of the vehicle, do not get water or cleaning fluids on the unit. ! The CD player is a precision instrument and will not operate properly in extreme hot or cold. In case of such conditions, wait until the interior temperature of the vehicle reaches a normal temperature before using the player. ! If the temperature inside the player gets too hot, a protective circuit will automatically stop play of the disc.
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.
© 2002 Audiovox Electronics Corp.
