C3-RS-730 LCD PROFESSIONAL 2-WAY LCD REMOTE CAR STARTER & ALARM SYSTEM With Built in Temperature, Voltage Sensor And Two-way Serial Port Data Link Compatible OPERATION MANUAL Please register your product at: www.autopageusa.
Congratulations on your purchase of the RS -730 LCD remote start vehicle security system. We sincerely hope the purchase of the RS -730 remote start security system gives peace of mind to you. The RS-730 LCD is a state-of-the-art two-way communication system. Please take the time to read over this manual to thoroughly familiarize your self with the many features and options of the RS-730 LCD . Auto Page, Inc.
A. BATTERY REPLACEMENT: This system needs no specific maintenance beyond remote control battery replacement. The 2-way remote is powered by a 1.5V AAA battery. The 1-way remote is powered by a pair of 3V, CR2016 batteries. Battery Level Indicator (2-way remote) The Battery Level indicator has three level indicators that serve as a visual indication of battery charge.
Manual Gear Engine Start Memorizing for the car with manual gear was set up Activate Channel 3 (Trunk Release). Activate Channel 3 Activate Channel 4 Time Monitor 12:00 12:00 Alarm Clock You have set morning call alarm Parking Meter Reminder when time is up for parking Low Battery You have to replace the battery of remote control.
3. Trigger 4. Passive Starter Disable 5. Panic 6. Car-Jacking Alarming Flashes Alarming Alarming Flashes Flashes 7. Car Locator 6 Chirps 12 Flashes Slow Flash Disable Fast Flash Disable Disable Flashes Flashes Flashes Locking E. ACTIVE ARMING – LOCK & ARM: 1. Press button on the transmitter. 2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle’s doors will lock upon arming if interfaced with the security system.
TAMPER DISARMING : If the alarm is triggered, upon disarm the system’s siren will chirp 4 times, and the parking lights will flash 3 times telling you the alarm has been triggered during the last armed state. PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights “ON” for 30 seconds and for 10 seconds upon the lock signal.
locks will remain operational. To use the valet mode, the system must first be disarmed either by using your remote transmitter, or by operating the Manual Override sequence. Get into/out valet mode using the ignition key. Enter Valet Mode: a). Under disarm mode, turn the ignition to “ON” position. b). Press and hold valet switch for 2 seconds until the LED turns ON solid. The LED will remain on as long as the system is in 'valet mode'. Exit Valet Mode: a). Turn ignition 'ON'. b).
1.When the Ignition is ON press F button four times while “CAR JACK” is flashing in the text area, then press button to activate Anti Car-Jacking mode or Under ignition ON , press and hold the and buttons at the same time for 2 seconds. The parking lights will turn on for 1.5 seconds to indicate the system has entered the anti car-jacking mode. 2. Once the system in anti car-jacking mode, the system will be triggered when any door i s opened and closed while the ignition is “ON”.
Q. DOME LIGHT CONVENIENCE SUPERVISION (Optional Feature) The alarm has a unique feature that will turn on your vehicle dome light as follows: 1. Upon disarming, the interior light wi ll remain on for 30 seconds. 2. If the vehicle is intruded, the interior light will flash for the same duration as the siren. Note: Turning on the ignition switch or arming the alarm will turn off the dome light. R. IGNITION CONTROL DOOR LOCK/UNLOCK.
X. Clear the Flash Icon and Melody Sound: The Transmitter will reset the flashing icons the next time the Ignition is cycled to the ON position. Y. Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will alert the user through a melody sound and a flashing trigger icon. Press any button on the LCD remote transmitter to stop melody sound only. Z. Vibration / Melody Mode: (see advanced users menu for more info) Press and hold the F button until 2 beeps are heard.
1. Before turning off the engine, press the button once on the transmitter and the LED indicator will flash 3 times to confirm enter. 2. Turn the ignition key to OFF position. (The engine will stay running.) 3. The engine will run until the pre-programmed time elapsed or shutdown input is received. D.
2. Immediatel y depress the button then press and hold the button for 2 seconds. (or depresses + buttons, if you program + buttons = Start / Stop button.) The parking light will flash (4) times. The siren or horn chirps (4) times. The vehicle is no longer programmed to start automatically. F. TEMPERATURE CHECK With the built in temperature sensor you can monitor, Through the LCD screen, the present indoor temperature of the passenger compartment of your vehicle. F ” button first until 3 chirps are heard.
Table 1: ONE beep to confirm (Press and hold until ONE Beep is heard) F Button LCD Display Press once Backlight turns on for 5 seconds Press twice within 5 PASS and Press seconds PASS icon flashing and bypass the sensor 1. Press three times HIDDEN ALARM and Press within 5 seconds Press four times within Button button to arm the alarm button to a rm system and with Hidden Alarm Function.
Table 5: Do-Re-Mi sounds to confirm F Button LCD display Press and hold the F DEFLT flashing Button Press & hold button for 2 seconds Button for 6 second until to back to default setting and 1 chip for Do-Re-Mi sounded confirm D. PROGRAMMING LCD REMOTE: Selecting and Adjusting Menu options: • • • • • • • • • • ? Press and hold F button for 1 second until 2 beeps sound, then release the F button. ? The text will flash on the LCD screen, press button to enter the menu.
3 Second Vehicle Default is CAR 1 Security Operation Menu - Car Select 4 CAR 1 or CAR 2 -CAR 1 operation. - CAR 2 operation.
- Daily Start Minute 7:30AM , - Adjus ts clock minute from 0 to 59 30 is flashing To Exit: Do not push any buttons for 20 seconds LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
charges prepaid. Warranty Service can be provided through the dealer where the equipment is originally purchased. 6. Any unexpired WARRANTY shall be applicable to equipment and parts in the possession of the original purchaser only. 7. THIS WARRANTY IS IN LIEU OF ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 8.
It is recommended to have a minimal digital service plan on your cell phone Your RS-730 is CI3 compatible and will open your world to the true power of two way communication. Complete tracking and full cell phone functionality can be added to your system. For more information please visit your local authorized Autopage dealer or go to www.autopageusa.com .
NOTES: BLANK PAGE 20
Compatible 2-Way Communication to the Power of 3 960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323-1800 or (800) 262-2527 www.autopageusa.
