C3-RS-915 LCD PROFESSIONAL 2-WAY LCD REMOTE CAR STARTER & ALARM SYSTEM With Built in Temperature & Voltage Sensor And Two-way Serial Port Data Link Compatible OPERATION MANUAL Please register your product at: www.autopageusa.
Congratulations on your purchase of the RS-915 LCD remote start vehicle security system. We sincerely hope the purchase of the RS-915 remote start security system gives peace of mind to you. The RS-915 LCD is a state-of-the-art two-way communication system. Please take the time to read over this manual to thoroughly familiarize your self with the many features and options of the RS-915 LCD.
B. STANDARD LCD ICON CONFIGURATIONS: 12:00 The lock icon will be displayed when the door locked. The unlock icon will be displayed when the door unlock Sensor Bypass Sensor 1 bypass under Arm mode Hidden Alarm Mode The security system arm with hidden alarm function (silent alarm) Valet Mode Remote start and alarm functions shall be temporarily on hold.
OPERATION: REMOTE TRANSMITTER OPERATION: C: Transmitter Button System Function Remark Lock Doors & Arm System Panic function Car Locator Arm and Delete The 2 Stage Shock Sensor - Arm System and Hidden Alarm + Function Silent Arming / Disarming + Active Anti Car-Jacking Mode Press twice within 3 seconds. Pass will appear on the remote Press within 3 seconds and Hold button for 2 seconds Ignition in "off" position.
E. ACTIVE ARMING – LOCK & ARM: 1. Press button on the transmitter. 2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The vehicle’s doors will lock upon arming if interfaced with the security system. DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. SILENT ARMING / DISARMING: Press the transmitter and buttons at the same time.
TWO STEPS DOOR UNLOCK (Optional): This feature will independently unlock the driver’s door only when disarming the security system. Pushing the button a second time within 3 seconds will unlock the other doors. AUTOMATIC RE-ARM: If this feature is selected, the security system will automatically re-arm itself in 60 seconds after disarming with remote transmitter. Automatic rearm will cancel if any door is opened before the 60 seconds timer has elapsed. H.
Get into/out valet mode using the ignition key. Enter Valet Mode: a). Under disarm mode, turn the ignition to “ON” position. b). Press and hold valet switch for 2 seconds until the LED turns ON solid. The LED will remain on as long as the system is in 'valet mode'. Exit Valet Mode: a). Turn ignition 'ON'. b). Push and hold valet switch for 2 seconds, The LED will turn off indicate the system are exiting the valet mode. J. CAR LOCATOR Under armed mode, press the button to active car locator function.
Under ignition ON, press and hold the and buttons at the same time for 2 seconds. The parking lights will turn on for 1.5 seconds to indicate the system has entered the anti car-jacking mode. 2. Once the system in anti car-jacking mode, the system will be triggered when any door is opened and closed while the ignition is “ON”. PASSIVE ANTI CAR- JACKING: (Programmable) It will operate as noted below: 1. Turn the ignition switch to the “ON” position and the system will arm. 2.
R. IGNITION CONTROL DOOR LOCK/UNLOCK. (Programmable Feature) If the vehicles door locks have been interfaced to the security system, the system will automatically lock the vehicle's doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”. (Default setting is “OFF”) S. TRUNK RELEASE (CHANNEL 3) OUTPUT. Press and hold button on the transmitter for two seconds to remotely control the trunk release. T. CHANNEL 4.5.6 TIMER CONTROL OUTPUT.
3. While the LED is illuminated, press any button on the remote control transmitter to control a second vehicle security system. 4. nd For LCD transceiver – 2 car operation : a. Press and hold F button of LCD remote for 1 second until 2 beeps sound and then release the F button. b. The text will flash on the LCD screen, press button to enter the menu. c. Press or button to move up or down in the menu, find CAR SELECT on the menu. d.
2. Press the brake pedal. Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. C. TEMPORARY STOP FEATURE: This feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate control on. 1.
be shown on the LCD screen. This reading may be higher than actual ambient temperature due to the greenhouse effect and is relative only to the inside vehicle temperature. G. TO TURN OFF THE REMOTE START: When the engine is running (by remote start), if you want to stop it, 1. Press button once on the remote transmitter under the remote start mode. 2. Move the optional remote start enable toggle switch to OFF position. (If installed) 3.
ADVANCED USER’S MODE: C. LCD REMOTE CONTROL TRANSCEIVER OPERATION: Enter: Press and hold F Button until beep sound respond from LCD transceiver indicate into table 1 – 5 as below. Exit: Press the , or button to exit this mode. Table 1: ONE beep to confirm (Press and hold until ONE Beep is heard) F Button LCD Display Press once Backlight turns on for 5 seconds Press twice within 5 PASS and Press seconds PASS icon flashing and bypass the sensor 1.
times within 5 seconds Press FOUR more icon flashing Temperature of the vehicle Start timer and times within 5 seconds Press button to activate or cancel daily start. icon flashing Table 4: FOUR beeps to confirm (Press and hold until FOUR Beeps are heard) F Button LCD display Press and hold the F DEMO mode Button Press button to activate Button for 4 second Backlight will be ON until DEMO until 4 beeps sounded operation end.
- Toggle + or - Enables parking countdown. Parking There is a beep 5 min. before the Parking countdown countdown reaches 0. - Disables parking countdown. 2 Illumination Default is Menu - Toggle Illumination Mode 3 SEC. or 5 SEC. or OFF , Basic operation with backlight Illumination 3 SEC. or 5 SEC.; OFF – basic operation without backlight Illumination. 3 Second Vehicle Default is CAR 1 Security Operation Menu - Car Select 4 CAR 1 or CAR 2 -CAR 1 operation. - CAR 2 operation.
- Toggle power - While the power save mode, the LCD remote transceiver uses “0” current to save save the battery power. - Power save OFF Exit: Press any button of the LCD remote transmitter to exit the “Power Save Mode”. 10 Daily Start Timer Daily Start Time Adjust Only (ex. 7:30AM) Setting - Daily Start Hour - Daily Start Minute To Exit: 7:30AM 7:30AM 30 is flashing Do not push any buttons for 15 seconds C3 RS915 REV.
LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery.
You must register your product online at http://www.autopageusa.com to receive any warranty service. Please go to the customer service tab and select product registration. It is the purchaser’s responsibility to register this product for any future warranty service. Warning: Some batteries may contain Perchlorate What is Perchlorate? Perchlorate is both a naturally occurring and manmade contaminant increasingly found in groundwater, surface water and soil. Most perchlorate manufactured in the U.S.
It is recommended to have a minimal digital service plan on your cell phone Your RS-915 is CI3 compatible and will open your world to the true power of two way communication. Complete tracking and full cell phone functionality can be added to your system. For more information please visit your local authorized Autopage dealer or go to www.autopageusa.com . C3 RS915 REV.
Compatible 2-Way Communication to the Power of 3 960 Knox Street Unit B, Torrance, CA 90502 Tel: (310) 323-1800 or (800) 262-2527 www.autopageusa.com C3 RS915 REV.