Instruction manual

The baudrate for data transfer through the RS232 interface can be

set by means of the SELECT BAUDRATE drop down menu and

CHANGE BAUDRATE function field.

This is necessary if a high-speed connection is needed for data

transfer through the serial interface.

If the baudrate should be changed, a connection must first be

established by clicking on TRY TO CONNECT.

The CHANGE BAUDRATE button will then be active.

Now a new baudrate can be selected under SELECT BAUDRATE.

A click on CHANGE BAUDRATE sends the new baudrate

information to the sensor.

When the new baudrate information has

been successfully sent, the sensor

operates with the new baudrate. A window

will pop up, prompting you to select

EEPROM and then to press SEND. After a

hardware reset the new baudrate only will

be used when EEPROM and SEND have

been pressed.

A click on ACCEPT SETTINGS saves the

current interface settings, which will then be

automatically set when the software is

restarted.

colorCONTROL C4