Instruction manual

Once in Temporary Override mode, the clock and day are displayed,

along with the SET indicator; all other indicators are cleared from the

display. The set point temperature will flash to indicate that it can be

changed:

Pressing the UP or DOWN key will increase or decrease the set point

temperature in 0.5 °C steps - the set point temperature can be adjusted

within a set range or 10 °C to 35 °C.

You can press SET at any time to confirm the new Temporary Override

setting and return to Normal mode, or press no keys at all and wait

approximately four seconds.

Temporary Override mode remains active until the clock or programme

settings are adjusted, Frost Protection is activated or the next programme

time / temperature set point is reached.

RT505TX INSTRUCTION MANUAL

Salus RT505TX Manual 011_89 04/09/2012 08:59 Page 12