Instruction manual

PROGRAMMING THE RT505TX

The RT505TX offers great versatility with its programming options,

allowing the user to programme the unit to operate on a 5/2 or 7 day

control cycle. The programmable thermostat has a default set of

Programmes that have been designed to meet the needs of most users. If

these default programmes are not suitable for your particular situation,

reprogramming the RT505TX with your own settings is a very

straightforward operation.

Selection of the default programming mode (5/2 or 7 day) is made by

changing the jumper setting on the rear of the RT505TX thermostat, as

previously described within the Installation section of this manual.

5/2 DAY MODE

5/2 day mode is the default programming mode for the RT505TX. With

this mode selected, five different sets of time and set point temperatures

can be set for Weekdays or Weekends.

To review or change a programme, press the SET key when the RT505TX

is in Normal mode. This will change the unit status to Programme Setting

mode.

The LCD display will display programme number 1 and SET PROG, with all

other indicators cleared. The weekdays will be flashing to indicate they

are the selected item and are ready to be adjusted:

Press the UP or DOWN key to select the programme set for either

Weekday or Weekend to be reviewed or adjusted. Pressing the SET key at

any time when in programming mode will return the RT505TX into

Normal mode.

Press the SELECT key to confirm the

Weekday or Weekend selection. Once

this is set, the ‘Hour’ will flash to

indicate that it is the selected item

and is the next item to be adjusted:

RT505TX INSTRUCTION MANUAL

Salus RT505TX Manual 011_89 04/09/2012 08:59 Page 8