RS-610 Plus PROFESSIONAL REMOTE CAR STARTER & KEYLESS ENTRY OPERATIONS MANUAL THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY
SYSTEM OPERATIONS A. 5-BUTTON TRANSMITTER OPERATION Transmitter Button System Function Remark Lock Doors & Arm System Panic function Press and seconds Hold for 3 Unlock Doors & Disarm System Two Steps Door Unlock & Disarm System - Press twice seconds.
TWO STEPS DOOR UNLOCK: This feature will independently unlock the driver door only when deactivating the system. Pushing the button a second time within 3 seconds will unlock the entire vehicle. D. LED DISPLAY: LED Function Off Disarmed Slow flash Armed On (solid) Valet Mode E. CHIRP INDICATOR: Chirp Function 1 Chirp Arm 2 Chirps Disarm 6 Chirps Car Locator F. PARKING LIGHTS: Parking light Function 1 Flash Arm 2 Flashes Disarm 12 Flashes Car Locator Constant On Under Remote Start G.
Exit Valet Mode: 1. Return to normal operation, turn ignition ‘on’. 2. Push and hold valet switch for 2 seconds, The LED will turn off indicating the system has exited the valet mode. I. PANIC FUNCTION: (IF CAR HORN IS INSTALLED) The transmitter can be used as a remote panic switch to manually trigger the vehicle’s horn in case of emergency. 1. Press and hold the button for 3 second. The horn will immediately sound. 2. During panic mode, the normal function of this transmitter button will be suspended.
REMOTE START OPERATIONS WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do not start the vehicle by remote while it’s in an enclosed area or garage. 5.
C. TO OVERRIDE VEHICLE FROM REMOTE START CONTROL: To operate the vehicle while running on the remote start. 1. Insert the ignition key and turn it to “ON” ( not the start) position. 2. Press the brake pedal. Note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. D. TEMPORARY STOP FEATURE: This feature allows the vehicle to remain running after the key has been removed from the ignition.
F. SHUT-DOWN INPUT FOR REMOTE STARTER: If any of the following conditions exist while the system is operating, the engine will not start or will shut down immediately: 1. The hood is opened. 2. The brake pedal is pressed. 3. Move the optional remote start enable toggle switch to OFF position. (If installed) 4. Engine is over-revved. {“Tachometer checking type” only} 5. The pre-programmed run time (5 /10 / 20 / 30 minutes) has elapsed. 6. Transmitter button is pressed. 7.
NOTES
LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. and Continental U.S. Only) 1. AutoPage, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your AutoPage equipment is guaranteed for “life” to the original purchaser/user of the equipment under the following conditions: If the product proves defective (according to AutoPage’s testing) within the first year, the defective unit may be exchanged or repaired free of charge.
This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD which must have complete information to receive warranty service. Please keep this card in a secured place.
1815 W. 205th Street Suite #101 Torrance, CA 90501 Tel: (310) 618-2002 or (800) 262-2527 www.autopageusa.
