User manual

178
TESTING
For more information visit www.bowers.co.uk
SURFACE ROUGHNESS TESTER
Code No Description
MTR-110UK Surface Roughness Tester
SURFACE ROUGHNESS STANDARDS
Code No Description
10-7524 3 Specimens Flat Lapping 2, 4 and 8µ" AA
3 Specimens Reaming 16, 32 and 63µ" AA
6 Specimens Grinding 2, 4, 8, 16, 32 and 63µ" AA
6 Specimens Horizontal Milling 16, 32, 63, 125, 250 and 500µ" AA
6 Specimens Vertical Milling 16, 32, 63, 125, 250 and 500µ" AA
6 Specimens Turning 16, 32, 63, 125, 250 and 500µ" AA
The Surfmatic MTR110 is a pocket sized surface roughness measuring instrument ideally suited to rapid on-the-spot surface measurements.
Conforms to ISO Class 3.
Ideal for use in the drafting room, engineering department or small shop.
Moore & Wright Surface Roughness
Tester - MTR110
Surface Roughness Standards
Features
• Back-light LCD
• Dynamic Test Display: progress of cut-off length during testing
• Li-ion rechargeable batteries
• Protection slide on pick-up
• Auto-off after 90 seconds
• Pocket-size and economically priced
• Both Ra and Rz parameters in one instrument
• Features external calibration specimen
• Large measuring range suitable for most materials
• Piezo-electric pick-up stylus for external surfaces
• Includes steel test piece
• Includes charger unit
• Measurements of shafts above 40mm diameter
using the Vee groove in base
Features
• Made from solid electroformed nickel
• Markings in AA (microinches) and metric in Ra (micrometers)
• Each type of surface finish is truly and consistently reproduced
to give the operator a realistic idea of the feel, appearance
and texture of the machined component
• Conforms to S.A.E. and military specifications for visual and
tactile inspection
• Set contains 30 Specimens, each 7/8" x 3/8"
Please visit www.bowers.co.uk for full technical specification.
BUK2014_P178-179.indd 178 26/03/2014 14:13