User manual

179
TESTING
Tel: [phone] Fax: [phone] Partners in Precision
CV SURFACE ROUGHNESS TESTER
Code No Description
W-R135 Surface Roughness Tester + RS-232 output
W-R130/3200 Stand for R-135
W-R130/4101 Data cable to PC or Printer
Surface Roughness Tester - R-135
Standard Delivery
• Main unit
• Protection cover
• Roughness test plate Ra
• Carrying case
• Manual
• RS-232
• Certificate
Optional
Accessories
• Tracers for special
applications
• Stand for stable testing
• Mini-printer with cable
• Datacable to
MS-Hyperterminal
TECHNICAL SPECIFICATION
Measuring ranges Ra-- 0.03µm ~ 6.35µm (1µ"~250µ")
Rz-- 0.2µm ~ 25.3µm (8µ"~999µ")
Display resolution 0.01µm / 1µ"
Cut-off 0.25mm / 0.001", 2RC filter, select 1-3-5 times
0.8mm / 0.03", 2RC filter, select 1-3-5 times
2.5mm / 0.01", 2RC filter, select 2 times
Display 3-digit LCD
Accuracy Meets ISO and DIN standards
Probe Type Piezoelectric
Maximum stylus force 15.0mN / 1500mgf
Stylus tip radius Diamond, 2 micron
Power 9V alkaline battery (not included)
Battery capacity Approx. 3000 measurements
Output RS-232 to pc or printer (only IPX-104)
Handheld surface roughness tester for external surfaces and grooves.
The R-135 is a portable, battery-powered instrument for checking surface
roughness, with the measured values displayed on a digital readout display.
The instrument can be used in laboratory, inspection area, workshop, or
wherever on-site surface roughness testing is required.
Features
• Pocket-sized and economically priced!
• External and internal finish testing with swivable tracer
• Ra and Rz parameters in one instrument and all available after each
individual test
• Standard 9V battery (not included)
• Three cut-off 0.25mm, 0.8mm and 2.5mm, adjustable to 1-3-5 times
• Pi‘zo-electric pick-up stylus for external surfaces with
diamond tip of 2 micron according to the latest ISO standards
• With data output
Standard probe for most applications
3.8mm
7.0mm
Transverse chisel probe for gauging
sharp edges or small O.D., aligned to
axis of traverse
3.8mm
7.0mm
0.5mm
Parallel chisel probe for gauging sharp
edges or small O.D., perpendicular for
axis of traverse
0.5mm
3.8mm
7.0mm
Small bore probe, minimum inside
diameter 5.0mm, up to depth of
15.0mm
15mm
58.0mm
4.0mm
6.0mm
Groove bottom probe for measuring
the bottoms of O-ring grooves, recesses
and holes up to 8.0mm depth
55mm
1.5mm
8.0mm
8.0mm
BUK2014_P178-179.indd 179 02/04/2014 09:03