User manual

182
TESTING
For more information visit www.bowers.co.uk
Diavite Tracers
The flexible application of a surface roughness meter can be reached using a Diavite tracer, of which there are several to
choose from. For DH-8 and COMPACT II, 17 different tracers are available, and thanks to the integrated reference flat in the
VHF traversing unit, very precise measurements are no longer a problem - even using skid-less tracers.
Bore tracer
BZFH
Smallest bore: Ø 1.5mm
Max. measuring depth: 15mm
Gear tooth flanks: from module 0.75
Axis and knives tracer
AH
For measuring small axis,
knives, edges and wires.
Bore tracer
BH
Smallest bore: Ø 2.5mm
Max. measuring depth: 20mm
Concave-convex tracer
KKH
For measuring concave and
convex work pieces having
a minimum radius of 5mm. Also irregular curves can be measured.
Use minimum cut-off and length of traverse.
Slot tracer
NFH
Max. depth of slot: 25mm
Min. width of slot: 1.5mm
Slot tracer
NH
Max. depth of slot:
15mm and 20mm
Min. width of slot: 3mm
Standard tracer
SH
Smallest bore: Ø 8mm
Max. measuring depth: 27mm
Included in the delivery
Transversal tracer
QBH
For measuring radially in bores
and tubes.
Transversal tracer
QH
For use in slots and for crank shaft.
Transversal tracer
QKKH
For measuring radially slots in bores
and tubes.
Basis tracer
TH
For measuring of deep level
flats till 140mm.
Circumference and ball tracer
UH
Minimum possible diameter Ø 8mm.
Gear tooth flanks tracer
ZH
Tracer with skid for tooth flanks up to module 2.
Transversal tracer
WFH
For measuring slots inside
of flanks.
TRACER WITH SKID TRACER WITH SKID CONTINUATION
SKIDLESS TRACER
Small bore tracer
BZFH-06
Smallest bore: Ø 0.8mm
Max. measuring depth: 15mm
Gear tooth flanks: from module 0.5
Axis and knives tracer
AFH
For measuring small axis,
knives, edges and wires.
Slot tracer
NFH-06
Max. depth of slot: 10mm
Min. width of slot: 1.0mm
Swiss Precision
13-3022
13-3025
13-3058
13-3056
13-3054
13-3028
13-3060
13-3062R & 13-3062L
13-3068
13-3023
13-3024
13-3027
13-3023A
13-3067
13-3069A
13-3063
13-3066
BUK2014_P182-183.indd 182 26/03/2014 14:15