RST-2053AL PROFESSIONAL REMOTE CAR STARTER & 3 CHANNEL ALARM SYSTEM OPERATION MANUAL THIS PRODUCT IS DESIGNED FOR PROFESSIONAL INSTALLATION ONLY
This WARRANTY CARD is for your record. However, AutoPage reserves the right to request you to submit this WARRANTY CARD which must have complete information to receive warranty service. Please keep this card in a secured place.
SECURITY OPERATIONS REMOTE TRANSMITTER OPERATION Your AutoPage Security System comes with two 5-button Remote Control Transmitters that feature a sophisticated code hopping system that will prevent illegal use of a code grabber with an attempt to record and steal your transmitter codes. LOCK – ARM & LOCK To arm your Security System, press the LOCK button once. The siren will chirp (1) time and the vehicles parking lights will flash (1) time indicating that the Security System is now armed.
VALET FUNCTION The Security System has a valet or stand-by mode that can be used when the vehicle is being serviced or valet parked. To activate the valet, turn the vehicles ignition to the “ON” position, then push and hold the valet / override switch for 2 seconds or until the Security Systems LED turns ON solid. Turn the vehicles ignition to the “OFF” position; your vehicle is now in valet mode. To reactivate, repeat the above procedure noting the Security Systems LED will now turn OFF.
LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. and Continental U.S. Only) 1. AutoPage, Inc. W ARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your AutoPage equipment is guaranteed for life to the original purchaser/user of the equipment under the following conditions: If the product proves defective (according to AutoPage s testing) within the first year, the defective unit may be exchanged or repaired free of charge.
NOTES
DOMELIGHT ILLUMINATED ENTRY (OPTIONAL) Your AutoPage Vehicle Security System is equipped with a domelight illuminated entry feature which will turn on the vehicles interior lights for 30 seconds after the Security System is disarmed / unlocked. This feature will reset once the vehicles ignition is turned “ON” or if the Security System is rearmed. PATHWAY ILLUMINATION (OPTIONAL) When disarming the Security System, the vehicles parking lights will stay on illuminating your pathway to the vehicle.
Transmitter Programming Enter: 1. Turn ignition switch ‘ON’. 2. Press the valet switch 3 times. 3. Horn will give one long chirp and the LED will begin to flash once every 3 seconds. Programming: 1. Press the any button on the first transmitter. 2. The horn will chirp 1 time. 3. Within 10 seconds push any button on the second transmitter 4. The horn will chirp 2 times. 5. To program 3rd & 4th transmitters repeat steps 1 & 2 of programming. Exit: 1.
REMOTE START FEATURES The remote start feature is activated using the remote control transmitters. START: a) Press the red * (star) button for 2 seconds. b) The vehicles parking lights will flash 2 times and stay “ON”. c) All doors will lock. d) The ignition will turn ON and check the system; after 3 seconds the vehicle will start. e) Three seconds after start the Accessory will turn “ON”. f) The vehicle will run for the length of run-time selected.
1815 W. 205th Street Suite #101 Torrance, CA 90501 Tel: (310) 618-2002 or (800) 262-2527 www.autopageusa.
