Installation Manual

NOTE: Actual application may vary slightly from illustrations.

Installation Steps

Page 2 of 2

5 6

Reposition the hood shield with the tabs sliding between the

hood and rubber seal and align with holes.

Apply bump ons to surface of hood

Install (4) screws with washers.

Close Hood.

screw

hood

washer

seal

hood shield

NOTE: DO NOT OVER TIGHTEN

Tighten all (4) screws until snug to secure

hood shield to hood.

Turn both of the hood bumpers counter clock-

wise 1 1/2 turns.

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.

Congratulations!

You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our

products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in

terms of fit, durability, finish and ease of installation.

Auto Ventshade

, the Auto Ventshade

logo and the AVS

logo are trademarks of Lund International, Inc.

Lund International

800-241-7219 • Visit us at lundinternational.com

™