Installation Manual

ManualsBrandsAuto Ventshade ManualsAutomotiveAuto Ventshade 21136 Hoodflector Dark Smoke Hood Shield for 2007-2013 Chevrolet Silverado 1500

Bugﬂector

- Bugﬂector II

- Carﬂector

™

Page 1 of 3

Installation Instructions

I - Sheet Number BF68 Rev.A

Important Safety Information

• CAUTION - Before driving, ensure that the hood shield is properly anchored to vehicle.

• Do not use automatic “brush-style” car washes.

• Do not use cleaning solvents of any kind.

• Periodically check all components for tightness.

For proper installation and best possible fit, please read all instructions BEFORE you begin.

For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.

Hood shield Screw x3 Well Nut x3 Bump On x4

NOTE: Actual product may vary from illustration.

Contents

Tools Required

Phillips screw-

driver

Preparation Before Painting / Installation

• A trial fit is recommended to ensure proper positioning and fit.

• Check fit of parts before painting as we will not accept the return of modified or painted parts.

• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.

Installation Steps

NOTE: Actual application may vary slightly from illustrations.

Raise hood.

Locate (3) circular holes on the underside of hood. Clean the area

around these with a soft cloth.

Alcohol Pad x1

Clean TowelCar Wash Supplies

Summary of content (9 pages)

PAGE 1
Installation Instructions I - Sheet Number BF68 Rev.A Bugﬂector® - Bugﬂector II® - Carﬂector™ For proper installation and best possible fit, please read all instructions BEFORE you begin. For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219. Important Safety Information • CAUTION - Before driving, ensure that the hood shield is properly anchored to vehicle. • Do not use automatic “brush-style” car washes. • Do not use cleaning solvents of any kind.
PAGE 2
Installation Steps NOTE: Actual application may vary slightly from illustrations. Locate (2) rubber bumpers on the underside of hood. Clean the area around these with an alcohol pad. rubber bumper Attach fasteners to hoodshield by inserting screw through hood shield, and into well nut. Partially thread screw into well nut. Well nut Hood shield 3 4 Center part on front edge of hood and align holes. Peel back 2” (5 cm) of tape liner off both tape strips to expose adhesive.
PAGE 3
Apply bump ons to surface of hood. 11 Care and Cleaning • Wash only with mild soap & dry with a clean cloth. Congratulations! You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
PAGE 4
Instructions d’installation I – Feuille numéro BF68 Rév.A Bugﬂector® - Bugﬂector II® - Carﬂector™ Pour obtenir une installation correcte et le meilleur ajustement possible, lire toutes les instructions AVANT de commencer. Pour toute assistance technique ou obtention de pièces manquantes, appeler le service des relations avec la clientèle au 1-800-241-7219.
PAGE 5
Étapes d’installation REMARQUE : La méthode d’application peut être légèrement différente de celle représentée par les illustrations. Fixer les fixations sur le pare-insectes en insérant la vis dans le pare-insectes puis dans l’écrou-douille. Insérer partiellement la vis dans l’écrou-douille. Localiser les 2 butoirs en caoutchouc du dessous du capot. Nettoyer le pourtour des butoirs avec un tampon à l’alcool.
PAGE 6
Appliquer les butoirs sur le capot. 11 Entretien et nettoyage • Laver exclusivement avec de l’eau savonneuse et sécher avec un chiffon propre. Félicitations ! Vous avez acheté l’un des nombreux produits de qualité Auto Ventshade™ offerts par Lund International, Inc. Nous sommes extrêmement fiers de nos produits et souhaitons que vous tiriez des années de satisfaction de votre investissement.
PAGE 7
Instrucciones de instalación Hoja informativa N.° BF68 Rev.A Bugﬂector® - Bugﬂector II® - Carﬂector™ Para una instalación adecuada y el mejor ajuste posible, lea todas las instrucciones ANTES de comenzar. Si desea recibir asistencia técnica u obtener piezas faltantes, llame al Servicio al cliente al 1-800-241-7219. Información importante de seguridad • PRECAUCIÓN - Antes de conducir, asegúrese de que la cubierta para capó esté correctamente anclada al vehículo.
PAGE 8
Pasos de instalación AVISO: La colocación real puede variar con respecto a las ilustraciones. Ubique los (2) topes de goma en la parte inferior del capó. Limpie el área alrededor de los topes con un paño esterilizado. Coloque los sujetadores en la cubierta para capó insertando el tornillo luego a través de la cubierta para capó y dentro del remache de tuerca ciego. Introduzca parcialmente el tornillo en el remache de tuerca ciego.
PAGE 9
Coloque los soportes en la superficie del capó. 11 Cuidado y limpieza • Limpie solamente con agua jabonosa tibia y seque con un paño limpio. Felicidades Usted ha comprado uno de los tantos artículos de calidad de Auto Ventshade™ ofrecidos por Lund International, Inc. Nuestros productos son nuestro mayor orgullo. Deseamos que disfrute de años de satisfacción con su inversión.