User's Manual

Usage
example
(HOST→BT) : AT+RECONNECT
(BT→HOST) : +OK
(BT→HOST) : +CONNECTED[xx:xx:xx:xx:xx:xx]
 Request connection with the SERVER recently connected to the BT i n
the Host device and get connected
5.3.1 AT+AUTOCONNECT?
Operation Request the setting status of AUTOCONNECTION with the SERVER recently
connected in CLIENT
Response +OK
Description
If Request is made normally, respond with “+OK.” If AUTOCONNECTION is set,
respond with “ON.” Otherwise, respond with “OFF.”
Usage
example
(HOST→BT) : AT+AUTOCONNECT?
(BT→HOST) : +OK
(BT→HOST) : ON
 You can know that the setting of AUTOCONNECT to the BT is requested
and the same is currently set in the Host device.
5.3.2 AT+AUTOCONNECT=ON
Operation Set AUTOCONNECTION to the SERVER recently connected in CLIENT
Response +OK
Description If Request is made normally, respond with “+OK.” If Booting or Connection state
is disabled after the setting, try to make Auto Connection.
Usage
example
(HOST→BT) : AT+AUTOCONNECT=ON
(BT→HOST) : +OK
 Set Auto Connection with the SERVER recently connected to the BT in the
Host device.
5.3.3 AT+AUTOCONNECT=OFF
Operation Disable the setting of AUTOCONNECTION to the SERVER recently connected in
CLIENT.
Response +OK
Description If Request is made normally, respond with “+OK.” Apply immediately after
disabling the setting.