Specifications

Configuring Additional Call Features
How to Configure Additional Call Features
94
Cisco IOS Survivable Remote Site Telephony Version 3.4 System Administrator Guide
Example
The following example enables the playing of an audio file called classical.au on G.711, on-net VoIP,
and PSTN calls:
call-manager-fallback
moh classical.au
Configuring MOH from Flash Files
The MOH Multicast from Flash Files feature facilitates the continuous multicast of MOH audio feed
from files in the flash memories of Cisco SRST branch office routers during Cisco CallManager fallback
and normal Cisco CallManager service. Multicasting MOH from individual branch routers saves WAN
bandwidth by eliminating the need to stream MOH audio from central offices to remote branches.
Configuration for this feature involves configuring Cisco SRST and Cisco CallManager to work
together, which is described in Integrating Cisco CallManager and Cisco SRST to Use Cisco SRST As a
Multicast MOH Resource at
http://www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/srs/srsinter/moh.htm.
The MOH Multicast from Flash Files feature can act as a backup mechanism to the MOH live feed
feature. MOH live feed provides live feed MOH streams from an audio device connected to an E&M or
FXO port to Cisco IP phones in SRST mode. Music from a live feed is from a fixed source and is
continuously fed into the MOH playout buffer instead of being read from a flash file. See the
Configuring SRST MOH Live-Feed Support section at
http://www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/srs/srsinter/moh.htm.
Defining XML API Schema
The Cisco IOS commands in this section allow you to specify parameters associated with the XML API.
For more information, refer to the XML Developer Guide for Cisco CME/SRST.
SUMMARY STEPS
1. call-manager-fallback
2. xmlschema schema-url
3. exit