Specifications

Integrating Voice Mail with Cisco SRST
Configuration Examples
149
Cisco IOS Survivable Remote Site Telephony Version 3.4 System Administrator Guide
Configuration Examples
This section provides the following configuration examples:
• Configuring Local Voice-Mail System (FXO and FXS): Example, page 149
• Configuring Central Location Voice-Mail System (FXO and FXS): Example, page 150
• Configuring Voice-Mail Access over FXO and FXS: Example, page 150
• Configuring Voice-Mail Access over BRI and PRI: Example, page 151
Configuring Local Voice-Mail System (FXO and FXS): Example
The “Dial-Peer Configuration for Integration of Voice-Mail with Cisco SRST” section of the example
below shows a legacy dial-peer configuration for a local voice-mail system. The “Cisco SRST
Voice-Mail Integration Pattern Configuration” section must be compatible with your voice-mail system
configuration.
! Dial-Peer Configuration for Integration of Voice-Mail with Cisco SRST
!
dial-peer voice 101 pots
destination-pattern 14011
port 3/0/0
!
dial-peer voice 102 pots
preference 1
destination-pattern 14011
port 3/0/1
!
dial-peer voice 103 pots
preference 2
destination-pattern 14011
port 3/1/0
!
dial-peer voice 104 pots
destination-pattern 14011
port 3/1/1
!
! Cisco SRST configuration
!
call-manager-fallback
max-ephones 24
max-dn 144
ip source-address 1.4.214.104 port 2000
voicemail 14011
call-forward busy 14011
call-forward noan 14011 timeout 3
! Cisco SRST Voice-Mail Integration Pattern Configuration
!
vm-integration
pattern direct 2 CGN *
pattern ext-to-ext no-answer 5 FDN * CGN *
pattern ext-to-ext busy 7 FDN * CGN *
pattern trunk-to-ext no-answer 4 FDN * CGN *
pattern trunk-to-ext busy 6 FDN * CGN *