Specifications

Setting Up Call Handling
How to Set Up Call Handling
68
Cisco IOS Survivable Remote Site Telephony Version 3.4 System Administrator Guide
DETAILED STEPS
Command or Action Purpose
Step 1
voice translation-rule number
Example:
Router(config)# voice translation-rule 1
Defines a translation rule for voice calls and enters voice
translation-rule configuration mode.
number—Number that identifies the translation rule.
Range is from 1 to 2147483647.
Step 2
rule precedence/match-pattern/
/replace-pattern/
Example:
Router(cfg-translation-rule)# rule 1/^9/ //
Defines a translation rule.
precedence—Priority of the translation rule. Range is
from 1 to 15.
match-pattern—Stream editor (SED) expression used
to match incoming call information. The slash (/) is a
delimiter in the pattern.
replace-pattern—SED expression used to replace the
match pattern in the call information. The slash (/) is a
delimiter in the pattern.
Step 3
exit
Example:
Router(cfg-translation-rule)# exit
Exits voice translation-rule configuration mode.
Step 4
voice translation-profile name
Example:
Router(config)# voice translation-profile name1
Defines a translation profile for voice calls.
name—Name of the translation profile. Maximum
length of the voice translation profile name is 31
alphanumeric characters.
Step 5
translate {called | calling | redirect-called}
translation-rule-number
Example:
Router(cfg-translation-profile)# translate
called 1
Associates a voice translation rule with a voice translation
profile.
called—Associates the translation rule with called
numbers.
calling—Associates the translation rule with calling
numbers.
redirect-called—Associates the translation rule with
redirected called numbers.
translation-rule-number—The reference number of
the translation rule from 1 to 2147483647.
Step 6
exit
Example:
Router(cfg-translation-profile)# exit
Exits translation-profile configuration mode.
Step 7
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Enters call-manager-fallback configuration mode.