Specifications

Setting Up Call Handling
How to Set Up Call Handling
85
Cisco IOS Survivable Remote Site Telephony Version 3.4 System Administrator Guide
DETAILED STEPS
Examples
The following example shows how to set a dial-peer COR parameter for outgoing calls to the Cisco IP
phone dial peers and directory numbers created during fallback:
call-manager-fallback
cor outgoing LockforPhoneC 1 5010 - 5020
The following example shows how to set the dial-peer COR parameter for incoming calls to the Cisco
IP phone dial peers and directory numbers in the default COR list:
call-manager-fallback
cor incoming LockforPhoneC default
The following example shows how sub- and super-COR sets are created. First, a custom dial-peer COR
is created with names declared under it:
dial-peer cor custom
name 911
name 1800
name 1900
name local_call
Command or Action Purpose
Step 1
call-manager-fallback
Example:
Router(config)# call-manager-fallback
Enters call-manager-fallback configuration mode.
Step 2
cor {incoming | outgoing} cor-list-name
[cor-list-number starting-number -
ending-number | default]
Example:
Router(config-cm-fallback)# cor outgoing
LockforPhoneC 1 5010 – 5020
Configures a COR on dial peers associated with directory
numbers.
• incoming—COR list to be used by incoming dial
peers.
• outgoing—COR list to be used by outgoing dial peers.
• cor-list-name—COR list name.
• cor-list-number—COR list identifier. The maximum
number of COR lists that can be created is 20,
comprised of incoming or outgoing dial peers. The
first six COR lists are applied to a range of directory
numbers. The directory numbers that do not have a
COR configuration are assigned to the default COR
list, providing a default COR list has been defined.
• starting-number - ending-number—Directory number
range; for example, 2000 - 2025.
• default—Instructs the router to use an existing default
COR list.
Step 3
exit
Example:
Router(config-cm-fallback)# exit
Exits call-manager-fallback configuration mode.