Manual

www.qtv.com

www.autocue.com

Section 6: MSP08 Operation

Input select

Accessing the OSD controls

MSP08

Assembly and Installation

Guide

Seven menu categories are used to set up a MSP08 prompter display unit:

• Display settings

• Color settings

• Image position

• H & V Mirror

•OSD Control

• Languages

The tables in the following sections list the various sub-menu selections and the

options that can be set for them.

Press the Up and Down arrows to highlight a heading and press the Menu button

to select it. The sub-menus within each category are selected with the Up & Down

buttons.

Press Menu again to select a sub-menu from a category and then the Up and Down

arrows to adjust or change the parameters. Press Menu once more to save the

setting.

6.3: Input select

To select a video signal source for your prompter display unit, push and hold the

Menu button for approximately two seconds.

Your MSP08 display unit has two channels available.

NOTE: If the main source uses a computer input, the secondary can

only accept a video signal.

Channel Signal Source Options

Main and Secondary VGA

DVI

Composite Video

s-Video

Component Video