Manual

Display Compatibility

1. Detach the upper glass

retainer by removing the

thumbscrews at either end.

2. With the blue dot in the

corner of the glass facing

you, place the shorter edge

of the glass into the lower

glass retainer in the bottom

of the hood.

3. Re-attach the upper glass

retainer, placing it on the top

of the hood to hold the glass

securely in place and re-attach

with the thumbscrews.

4. Carefully stretch the

elasticated end of the fabric

light excluder around the four

posts on the rear of the metal

frame.

Light excluder fitted

Medium Wide Angle

Guide

Professional

Series Hood

PSP 12” and

17” Monitor

autocue.com

iPad Display

Tablet PC

Display

For more compatible

monitors see our website.

PAGE 1
Display Compatibility 1. Detach the upper glass retainer by removing the thumbscrews at either end. 2. With the blue dot in the corner of the glass facing you, place the shorter edge of the glass into the lower glass retainer in the bottom of the hood. iPad Display 3. Re-attach the upper glass retainer, placing it on the top of the hood to hold the glass securely in place and re-attach with the thumbscrews. 4.
PAGE 2
Components A C D A Upper glass retainer B Lower glass retainer C Glass D Tube clamp 2. Screw in the vertical hood mounting bars. 3. Align the tube clamp with the two holes in the back plate of the hood. 3. Screw in the horizontal monitor mounting bars. B 4. From the inside of the hood, insert two screws and tighten to secure the tube clamp in position. Repeat for the second tube clamp. Hood Assembly 2. Re-tighten the four studs to secure the frame and clamp each side in position.