Manual

WinCue Pro News User Guide IMT and SCSI cards • 142
It is also important that only one device on the SCSI bus is terminated, the device
located at the end of the cable must be the only one terminated. The IMT card is
terminated by default and is expected to be connected to the end of the SCSI
cable. SCSI termination is set using jumpers or switches on the SCSI devices; consult
their relevant manuals for further details.
The following tables detail hardware devices recommended for use with WinCue Pro
News. If you wish to use devices not listed here, please contact your vendor.
Autocue has tested a range of SCSI cards. Those listed below have been found
suitable for use with WinCue Pro News.
13.1.7.1 SCSI Cards for Desktop PCs
Manufacturer Type Bus I.M.T ROMs
Adaptec 2906 PCI V1.11/ V2.00
Adaptec 29XX PCI V2.00
13.1.7.2 SCSI Cards for Laptops
Manufacturer Type Bus I.M.T ROMs
Adaptec APA 1460A-2 Slim SCSI PCMCIA V1.11 / V2.00
13.1.7.3 USB SCSI Adaptors
Manufacturer Type Bus I.M.T ROMs
Adaptec USBXCHANGE USB V2.00