Instruction Manual

User Guide WinCueLT Scroll Controls • 69
B2 Mouse Scroll
In order to set up your mouse as a scroll control all you need to configure is the
action for each button and then click on OK.
B3 Two-button Serial Controller
To configure the Two-button Serial Controller you need to set the Serial Port that
it will be connected to and the actions for the two buttons.
B3.1 Stop Scrolling
By default to stop the text from scrolling you need to turn the knob as far as it will
go in the opposite direction. Another way you can stop the text from scrolling is to
use the Center Stop Mode option, which means that when you turn the knob back
to the center the text will stop scrolling. To set this option simply click on the box
beside the Center Stop Mode option. The Stop Point option sets how far you have
to turn the knob before it will stop, if the Stop Point option is set at 0 then the knob
will have to be fully turned before it will stop. The higher the number the Stop
Point option is set at the less the knob will have to be turned before the text will
stop scrolling.
B3.2 Button Actions
By default you should only be able to set the action for the Red button, the Black
button will be set at (FWD/REV) Change Direction, however if you set the Center
Stop Mode option you will be able to change action for the Black Button.