2009

Float Limit Controller dialog
The Float Limit Controller dialog opens when you first assign the Limit
controller, or when you right-click a highlighted Limit-controller track and
choose Properties.
Enable Toggles the Limit controller. When off, the original values of the
limited track are in effect. When on, the original values are limited by the
Upper Limit and Lower Limit values.
NOTE You can enable and disable all Limit controllers in the scene simultaneously
with the Toggle Limits command, available from the 3ds Max Animation menu.
If some Limit controllers are on and the rest are off, Toggle Limits turns them all
on.
Upper Limit Group
Enable Toggles the upper limit set by the controller. When off, no upper limit
is imposed. Default=on.
[Upper Limit value] The highest value permitted by the Limit controller. Any
values above this value in the original controller are clipped; that is, they're
set to this value, unless smoothing is in effect. Default=1000.0.
You can animate this value via keyframing and other standard methods, and
manipulate this animation in Track View via the Upper Limit track in the
controller's Limits branch.
3190 | Chapter 15 Animation