2009

Targets Lists all morph targets for the object, along with the percentage of
their influence at the current key. The total percentage of all targets is displayed
below the window. You can select any target in this window, and then adjust
its percentage of influence using the spinner at right.
Percentage Sets the percentage of influence for the target selected in the list
window. Percentage values can be negative as well as greater than 100 percent.
Constrain to 100% Limits total weight of all targets to 100 percent. As you
increase or decrease the percentage of a selected target, the other targets adjust
accordingly. The adjustment takes the form of balancing all of the target
percentages so that their relative weights remain the same.
When this check box is turned off, you can adjust the weight of each target
without affecting the others, and create a total that's greater or less than 100
percent. Totals greater than 100 percent cause the morph object to scale up
in size, while totals less than 100 percent cause the morph object to scale
down. Note that this check box is global, and not confined to a single key or
track.
Block Parameters Dialog (Block Controller)
Track View > Global Tracks > Block Control > Click and then right-click
MasterBlock track. > Properties > Master Block Parameters dialog > Add >
Choose tracks in Track View Pick dialog > Click OK. > Block Parameters dialog
Track View > Global Tracks > Block Control > Double-click MasterBlock track.
> Properties > Master Block Parameters dialog > Add > Choose tracks in Track
View Pick dialog > Click OK. > Block Parameters dialog
After clicking Add in the Master Block Parameter dialog and selecting tracks
in the Track View Pick dialog to create a Block, clicking OK in the Track View
Pick dialog displays the Block Parameters dialog.
Controller Subdialogs | 3279