9

Chamfer Curve 1163
Flipping the direction of a trim
Trim Curve—When on (the default), tri ms the
parentcurveagainstthefilletcurve.Whenoff,the
parent isn’t trimmed.
Flip Trim—When on, trims in the opposite
direction.
Seed 1 and S eed 2—Change the U location of the
seed value on the first and second curves. If there
is a choice of direct ions, the direction indicated
by the seed points is the one us ed to create the
chamfer.
Chamfer Curve rollout (modification time)
The lengths are t he dist ances f rom the intersection
(or apparent intersection) at which the chamfer
segment is d rawn.
Lengt h 1 —Thedistancealongthefirstcurveyou
click.
Lengt h 2 —Thedistancealongthesecondcurve
you click.
Some length values make it impossible to construc t
the chamfer. If you set t he length to an invalid
value, the chamfer returns to a default position and
is displayed in the error color (orange by default).
TrimFirstCurveandTrimSecondCurvegroups
These two group boxes let you control how the
parent curves are trimmed. The controls are the
same in each. "First" and "second" refer to the
order in which you picked the parent curves.