9

458 Chapter 6: Transforms: Moving, Rotating, and Scaling Objec ts
• Spa ce fr om End, Unbounded—Distributes the
number of objects you specify along a straight
line from the end toward the start of a s pline
or a pair of points. You specify the spacing
betweenobjects.Thesoftwarelockstheend
offsetsothatit’sthesameasthespacing.
•
Space from End, Specify Number—Distributes
the number of objects you specify toward the
start of a spline or a p air of points, star ting
at the end. The Spacing tool determines the
amount of space between objects based on the
number of objects and the length of the spline
orthedistancebetweenthepairofpoints.The
software locks the end offset so that it’s the
same as the spacing.
•
Space from End, Specify Spacing—Distributes as
many equally spaced objects as possible toward
the start of a spline or a p air of points, starting
at t he end. You specify the spacing between
objects.Thesoftwarelockstheendoffsetso
that it’s the same as the spacing.
•
Space f rom Sta r t, Unbounded—Distributes the
number of objects you specify along a straight
line toward the end of a spline or a pair of
points, starting at the st art. You specify the
spacing between objects. The s oftware locks the
startoffsetsothatit’sthesameasthespacing.
•
Space from Star t, Specify Number—Distributes
the number of objects you specify toward the
endofasplineorapairofpoints,startingat
the start. The Spacing tool determines the
amount of space between objects based on the
number of objects and the length of the spline
orthedistancebetweenthepairofpoints.The
software locks the start offset so that it’s the
same as the spacing.
•
Space from Star t, Specify Spacing—Distributes
as many evenly spaced objects as possible
towardtheendofasplineorapairofpoints,
starting at the start. You specify the spacing
between objects. The software locks the start
offset so that it’s the same as the spacing.
•
Speci fy Spacin g, Matching Off se ts—Distributes
as many evenly spaced objects as possible along
asplineorbetweenapairofpoints(andtheir
offsets). You s p e cify the spacing. The software
locks the st art and end offsets so that they’re
thesameasthespacing.
•
Divide Evenly, No Objects at Ends—Distributes
the number of objects you specify along a spline
or between a pair of points (and their offsets).
The Spacing tool determines the amount of
spacebetweenobjects.Thesoftwarelocksthe
start and end offsets s o that they’re the same as
the s pacing.
Context group
1. Edge-to-edge spacing
2. Center-to-center spacing
Edges—Usethistospecifythatspacingis
determined from the facing edges of each object’s
bounding box.
Centers—Use this to specify that spacing b e
determined from the center of each object’s
bounding box.