9

616 Chapter 8: Modifiers
you like; to stop, right-click in the viewport, or
turn the button off.
Note: If you return to marking p oints later, the
software star ts again where you lef t off earlier.
The points highlight in this order:
1. Upper Chest
2. Pelvis
3. Neck
4. Right shoulder
5. Left shoulder
6. Right hand
7. Left hand
After setting the poin ts, you can use the Panel
Position and Level controls at the Panels sub-object
level to place the panels automatically.
Curves rollout
Use the Curves sub-object level to stitch your
pattern panels together. You can also connect
seams in the Seams sub-object mode with a more
three-dimensional representation of the panels.
The Curves sub-object level provides a flat layout
to work in that can be useful for more complex
patterns. You can create and delete seams and
adjust the way your pattern fits together.
Cr e a te Seam—Creates a seam between two
segments. Select two segments of the panels
you would like to sew together, and click Create
Seam. This will ma ke a seam between these two
panels that will be sewn together at simulation
time. Seams get a randomly-generated color to
distinguishthemfromthepanels.