9

Garment Maker Modifier 621
Cr e ate Sea m —Creates a seam between two
segments. Select two segments of the panels you
would like to sew together and then click Create
Seam. This creates a seam between the two panels
that will be sewn together at simulation time.
Left: Segments selected
Right: Seam created between the two segments
Delete Seam—Deletes selected seam. (Selected
seam is colored red).
Reverse Seam—Reverses or flips a seam that has
been made with a twist in it. When creating seams,
the first vertex on each segment is used to line
up the resulting seam panel. Sometimes you can
end up with a twisted seam and will need to use
Reverse Seam to untw ist it.
A twisted seam that needs to be reversed
Mak e MultiSegment—AMultiSegmentisa
combination of two or more segments that will be
treated as one segment for the purpose of creating
seams. Select the segments you want to combine
then click this button. Note that if the segments are
not con tiguous, the gaps must be bridged by seams
beforethisMultiSegmentcanbeusedinaseam.
Br eak M ultiSegment—Break apart selected
MultiSegments.
On—Turns the selected seam on or off, making it
active or inactive.
Crease a ngle—Creates a crease at the selected seam.
Theanglevaluedeterminesthetargetangleofthe
crease between the two panels or along an internal
seam line (page 1–610).
Left: High crease angle
Right: Low crease angle
Cr e ase S t ren g t h —Specifies the strength of the
selected seam. T his v a lue affects the extent to
which the seam resists bending in relation to the
rest of the cloth object. A value of 2.0 means that
the cloth wil l have twice the resistance to bending