2011

Ribbon: Schematic tab ➤ Insert Wires/Wire Numbers panel ➤ Insert
Wire Numbers drop-down ➤ Wire Numbers.
Toolbar: Main Electrical 2
Menu: Wires ➤ Insert Wire Numbers
Command entry: AEWIRENO
Click Use Wire Layer Format Overrides Setup.
NOTE You can also access this dialog box by selecting Based on Wire Layer and
then clicking Layer Setup in the Wire Number Options section of the Project
Properties ➤ Wire Numbers dialog box.
Lists all defined wire layer formats.Wire list
Adds the new wire layer format to the list.Add
Updates the selected wire layer format with the changes
you specified in the dialog box.
Update
Removes the new wire layer format from the list.Delete
Specifies the name for the wire layer to modify. Type the
layer name or select from the list of valid wire layers. Wild
cards are allowed.
Wire layer name
Displays a list of valid wire layers.List
Automatically enters the default value for the format, se-
quence start, and suffix list fields.
Default
Defines the format override.Wire number format for layer
Specifies the sequential start number for the layer. Use it if
you are using Sequential Mode.
Starting wire sequence
Specifies a unique suffix list. The suffix list must be a comma
delimited string. Use it if you are using Reference Mode.
Wire number suffix list for layer
Encode wire color/gauge information into wire numbers | 989