2011

Select connector to Rotate or [Hold]:
Select the new connector, right-click, and select Enter
Adding wire numbers
Wire numbers are blocks or attributes inserted on a line wire entity. AutoCAD
®
Electrical assigns each wire number type to its own layer. You can assign a
different color to each of these layers so you can easily tell them apart. The
wire number placement is set to in-line as defined on the Drawing Properties
➤ Wire Numbers dialog box.
Insert wire numbers
1 Click Schematic tab ➤ Insert Wires/Wire Numbers panel ➤ Insert Wire
Numbers drop-down ➤ Wire Numbers.
2 On the Wire Tagging dialog box, specify:
Wire Tag Mode: Sequential
Start: 100
3 Click Drawing-Wide.
The wire numbers are automatically inserted into the drawing starting
with number 100.
4 Click Schematic tab ➤ Edit Wires/Wire Numbers panel ➤ Move Wire
Number.
5 Respond to the prompts as follows:
Specify new Wire Number location (select on wire):
Select each wire closest to Black Box 1, right-click
Adding wire numbers | 1891