2011

■ Location Code (%L)
■ Section
■ Sub Section
■ Sheet Number (%S)
■ Drawing Number (%D)
■ Drawing Description 1-3
■ File Name
4 Select the display option from the Display Options list and click the >>
button or add all of the options by clicking the All >> button.
The display option you selected moves to the Current Display Order list.
To rearrange this list, select an option and click Move Up or Move Down.
To remove an option from the list, select the option and click the <<
button.
5 (Optional) Change the character to use between the values in the listing.
The default separator value is a dash (-).
6 (Optional) Change the way the selection highlights in the listing
depending on whether the Project Manager is active or not. By default
the drawing file you select in the drawing list is highlighted at all times;
you can select to highlight your selection only when the Project Manager
drawing list is active.
7 Click OK.
The Project Drawing List automatically updates in the Project Manager.
Drawing List Display Example
In this example, Sheet Number (%S) and Drawing Description 1 were selected
as the display options and the separator value is a dash.
Drawing List AfterDrawing List Before
1 - Flow and Interconnection diagram, I/O listdemo01.dwg
2 - 3-phase motor control, Control circuitdemo02.dwg
3 - Power supplies, I/O module feedsdemo03.dwg
Drawing list display configuration
172 | Chapter 3 Project Management