2011

4 Select the Insert Wire Connection tool and insert the wire
connection in the center of the left-hand side of the rectangle. Use the
Midpoint OSnap to insert the wire connection attribute in the middle of
the line.
5 The wire connection insertion remains active until you press Enter. Press
“R{spacebar}” and insert the wire connection in the center of the
right-hand side of the rectangle.
6 Press “T{spacebar}” and insert the wire connection in the center of the
top of the rectangle.
7 Press “B{spacebar}” and insert the wire connection in the center of the
bottom of the rectangle. Press Enter.
Finishing the terminal symbol
1 Click Symbol Builder tab ➤ Edit panel ➤ Done.
2 Click Base Point: Pick point and select the center of the rectangle.
3 Select Wblock. Wblock creates the symbol .dwg file, while Block creates
the symbol for this drawing file only.
4 Enter the Name and file path or keep the default. AutoCAD Electrical
provides a default name for the new symbol based on the attribute
template selected. Avoid changing the first four letters of the file name
and limit the total length to 32 characters.
One-line symbols follow the same naming convention as schematic
parent and child symbols. For convenience the one-line symbols provided
have a “1-” suffix. However, the symbol name does not define the symbol
Build your own symbols | 2093