2011

3 phase wire numbering
Inserts fixed wire numbers using incrementing prefixes and suffixes for 3 phase
circuits. This tool speeds up the process of inserting special wire numbering
associated with 3-phase bus and motor circuits.
Ribbon: Schematic tab ➤ Insert Wires/Wire Numbers panel ➤ Insert
Wire Numbers drop-down ➤ 3 Phase.
Toolbar: Insert Wire Numbers
Menu: Wires ➤ Wire Numbers Miscellaneous ➤ 3 Phase Wire Numbers
Command entry: AE3PHASEWIRENO
You can use 3 Phase Wire Numbers in a continuous mode. You can insert a
long series of incrementing wire numbers and assign each, in turn, to the
selected wires.
You can add to the default prefix and suffix list display. Create an ASCII text
file and list each prefix/suffix entry, one per line in the file. Name the file
<projectname>.3ph (where "projectname" is the name of your active project)
or default.3ph and put the file in any folder that is part of search path list of
AutoCAD Electrical.
Specifies the prefix value for the wire numbers. Enter a value or click
List to choose from a default pick list.
Prefix
Specifies the base starting number for the wire numbers. Enter a value
or click Pick to select an existing attribute value on the active drawing.
Base
Overview of wire numbers | 975