2004

Configure a DWF6 Driver (Advanced) | 835
9 On the Plotter Name page, enter a name for the plotter configuration file.
Click Next.
10 On the Finish page, click Finish.
A new plotter configuration file (PC3) is created.
Command line
PLOTTERMANAGER
To specify or modify settings for plotted DWF files
1 On the File menu, click Plot.
2 In the Plot dialog box, click the Plot Device tab.
3 In the Plotter Configuration area, from the Name list, select a DWF plot-
ting device, and then click Properties.
4 In the Plotter Configuration Editor, on the Device and Document Settings
tab, select Custom Properties from the tree window.
5 Click Custom Properties.
6 In the DWF6 ePlot Properties dialog box, select the options you want, and
then click OK.
7 In the Plotter Configuration Editor, click OK.
8 In the Changes to a Printer Configuration dialog box, do one of the fol-
lowing, and then click OK:
■ Select Apply Changes for the Current Plot Only to specify a one-time
override of the configuration settings that isn’t saved to the ePlot con-
figuration file.
■ Select Save Changes to the Following File to save the configuration
changes to the DWF configuration file.
9 In the Plot dialog box, in the Location list, specify a plotting location for
the DWF file, and then click OK.
Standard toolbar
Command line
PLOT
To set color depth for plotted DWF files
1 On the File menu, click Plot.
2 In the Plot dialog box, click the Plot Device tab.
3 In the Plotter Configuration area, from the Name list, select a DWF plot-
ting device, and then click Properties.