Technical data

Adding Design Details
27
Cleaning Up
Before saving your work, you should clean up a few things.
1. To exit the sketch environment, in the graphics window, right-click and choose Finish Sketch.
The sketch you shared is also visible.
To turn off the display of this sketch:
2. In the Browser, between the Extrusion1 and Extrusion2 entries, right-click Sketch2 and choose Visibility
to clear the check mark.
Reviewing the Model and Saving Your Work
You have probably noticed that several new items appear in the Browser. The model tree in the Browser shows
each step in the modeling process. You can use the Browser to highlight or edit existing elements, and even
add new elements. As you become familiar with Autodesk Inventor, you will realize just how useful the
Browser is for many design and analysis tasks.
To see how the elements in the Browser are related to the geometry
on your part:
• Move the cursor over the elements in the Browser - the
corresponding part geometry is highlighted in the graphics
window.
Congratulations! You have just completed your design of the upper
clamp for the jogging stroller. This is a good time to save your work.
To save your design:
• On the Standard toolbar, click the Save tool.
INV8_TD_Book5.book Page 27 Tuesday, October 28, 2003 10:51 AM