Product data

Technical What’s New
Autodesk Inventor 20
User Mold Base
Create an assembly, and use the User Mold Base
command to place as a mold base. Before placement:
Use options in the dialog box to enable or disable
automatic constraints. Use the Mold Base Author
command to specify the component type and
alignment. If necessary, use the author command to
define the mold base after placement.
Edit Moldable Part
The command Edit Moldable Part, on the Core/Cavity
tab, Parting Design panel, activates the moldable
part file (MP) and turns off the visibility of other
components. Choose this command to edit the body of
the moldable part, and create hole patching and runoff
surfaces in the MP file.
Transition from Part to Mold
Create Mold Design on the part Tools tab, Begin panel
provides a smooth transition between part modeling
and mold design. Choose this command to enter the
mold design environment directly from the source part
file.
Multiple Locating Rings
Select a concentric reference and place multiple
locating rings in the same command. To place multiple
locating rings, select the base face, a concentric
reference, and then choose apply.